Value Collection 819-030C Cpvc 45 Elbow 3 in Sch 80

Product Description

The VALUE COLLECTION 819-030C is a Schedule 80 CPVC 45-degree elbow fitting designed for use in industrial and commercial piping systems that require a change in flow direction. Built from chlorinated polyvinyl chloride (CPVC), this fitting handles higher-temperature and higher-pressure service than standard PVC fittings. The 3-inch FIPT x FIPT end connections thread into compatible female-threaded pipe or fittings without the need for solvent welding at the joint. At 2.5 pounds, this is a solid, full-bodied fitting suited for demanding piping runs. Licensed plumbers and pipefitters are the typical installers.

This fitting is used in Schedule 80 CPVC piping systems found in industrial process lines, chemical distribution, hot and cold water distribution, and commercial plumbing applications. The 45-degree angle makes it well suited for offset runs where a gentler change in direction is preferred over a 90-degree turn. FIPT x FIPT threading allows the fitting to connect to threaded pipe ends or threaded adapters on both sides. It is appropriate for above-ground and exposed piping installations where Schedule 80 wall thickness is specified by design or code.

Key Features

• Schedule 80 wall thickness for increased pressure rating over Schedule 40
• CPVC material provides resistance to corrosion, many chemicals, and elevated temperatures
• 45-degree elbow geometry reduces flow turbulence compared to sharp 90-degree turns
• FIPT x FIPT end connections on both sides for all-threaded assembly
• 3-inch fitting size suits larger-diameter piping runs in commercial and industrial settings

Compatibility

Designed as an OEM-style replacement or new-installation fitting for Schedule 80 CPVC threaded piping systems using 3-inch pipe size.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable IPC or local plumbing codes. Shut off and depressurize the piping system completely before removing or installing any threaded fittings. Use an appropriate thread sealant rated for CPVC and the intended service fluid — do not use petroleum-based compounds that can degrade CPVC. Do not overtighten threaded connections, as CPVC can crack under excessive torque; hand-tight plus a limited number of turns with a strap wrench is the accepted practice.