Value Collection 810024 Mounted Flap Wheel 80 Grit Aluminum Oxide

Product Description

The VALUE COLLECTION 810024 is a mounted flap wheel designed for deburring, blending, and surface finishing on metal, wood, and composites. The wheel uses coated aluminum oxide abrasive at 80 grit, a medium grade suited for moderate stock removal and surface conditioning. It mounts via a 0.25-inch shank, making it compatible with standard die grinders and drill press setups. With a maximum rated speed of 25,000 RPM, it delivers consistent cutting action across a range of portable and benchtop applications. Machinists, fabricators, and metalworking professionals reach for this style of wheel when finishing inside contours, bores, and edges that flat abrasives cannot reach.

This wheel is used in light industrial and job-shop environments for finishing weld seams, cleaning casting flash, blending toolmarks, and preparing surfaces before coating. The 2-inch diameter and 1-inch face width give it a usable contact area suited to internal and external cylindrical workpieces. No interleaf construction means the flaps cut more aggressively and break down faster than interleaved styles, making the 810024 a good fit for heavier finishing passes rather than ultra-fine polishing work.

Key Features

• Aluminum oxide coated abrasive for consistent cut rate on ferrous and non-ferrous metals
• 80 grit medium grade balances stock removal with surface finish quality
• 0.25-inch shank mounts directly in standard die grinder chucks and drill presses
• 25,000 RPM maximum speed rating suits high-speed rotary tool operation
• 2-inch diameter with 1-inch face width covers a practical contact area for cylindrical finishing
• Non-interleaved flap construction for straightforward aggressive passes

Compatibility

Designed as a standard 0.25-inch shank mounted flap wheel for use with die grinders, flexible shaft machines, and drill presses that accept 0.25-inch shank tooling.

Installation Notes

Installation is performed by metalworking or fabrication personnel. Secure the 0.25-inch shank fully into the tool chuck and confirm the collet nut is tightened before operation. Verify the tool's maximum RPM rating meets or exceeds 25,000 RPM before mounting the wheel, and always operate within the wheel's rated speed limit. Wear appropriate eye protection and a face shield, and inspect the wheel for damage before each use.