Value Collection 808-020 Pvc 90 Elbow 2 in Sch 80 Fipt

Product Description

The VALUE COLLECTION 808-020 is a Schedule 80 PVC 90-degree elbow fitting designed for threaded pipe assemblies in plumbing, irrigation, and industrial piping systems. Sized at 2 inches with female iron pipe thread (FIPT) connections on both ends, this elbow allows a full 90-degree change in direction within a rigid PVC pipeline. Schedule 80 wall thickness provides greater pressure tolerance and mechanical strength compared to Schedule 40, making it suitable for demanding service conditions. At 1.24 pounds, the fitting is solid and ready for direct installation without additional preparation. Licensed plumbers and pipefitters are the typical installers of this component.

This fitting is used in residential and commercial plumbing, process piping, chemical distribution, and irrigation systems where a threaded 90-degree direction change is required. The FIPT x FIPT configuration threads onto male-threaded pipe or nipples on both sides, allowing integration into existing threaded PVC systems without solvent cementing at the connection points. Schedule 80 PVC is commonly selected where above-average wall strength is needed or where the piping may be exposed to physical contact or moderate mechanical stress.

Key Features

• Schedule 80 PVC construction for higher pressure ratings and thicker walls than Schedule 40
• 2-inch FIPT x FIPT end connections for threaded installation on both ends
• 90-degree elbow geometry for perpendicular direction changes in piping runs
• PVC material offers corrosion resistance suitable for water, irrigation, and many chemical service applications
• Compact, single-piece fitting at 1.24 pounds for straightforward handling and installation

Compatibility

Designed as an OEM-style replacement or new-install fitting for 2-inch Schedule 80 threaded PVC piping systems using female iron pipe thread connections.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable IPC or local plumbing code requirements. Depressurize and drain the affected piping section completely before removing any existing fittings. Apply an appropriate thread sealant or PTFE tape to the male threads before making up the connection — do not overtighten, as PVC threads can crack under excessive torque. Inspect the joint for leaks before returning the system to service.