Value Collection 729208 Pressure Gauge 0-300 Psi Npt

Product Description

The VALUE COLLECTION 729208 is a general-purpose pressure gauge designed for monitoring system pressure in a wide range of trade and industrial applications. It features a 2.5-inch dial face for easy readability and a 0.25-inch NPT threaded connection for straightforward installation into standard pipe fittings. The gauge reads from 0 to 300 psi, making it suitable for moderate- to higher-pressure systems. HVAC technicians, plumbers, and mechanical contractors commonly install this type of gauge on air lines, water lines, and other fluid-handling systems where continuous or spot-check pressure monitoring is required.

This gauge is intended for general-purpose service and fits a broad range of residential and light commercial applications. It is well suited for monitoring supply-line pressure on water distribution systems, compressed air circuits, and similar plumbing or mechanical piping arrangements. The 0.25-inch NPT connection is a standard thread form found on a wide variety of fittings, manifolds, and pipe assemblies used across the HVAC, plumbing, and industrial trades.

Key Features

• 2.5-inch dial diameter for clear, at-a-glance pressure readings
• Pressure range of 0 to 300 psi covers most general-purpose service needs
• 0.25-inch NPT threaded connection for compatibility with standard pipe fittings
• General-purpose gauge type suitable for air, water, and similar fluid systems
• Compact form factor fits tight installation spaces on valves, manifolds, and risers

Compatibility

Designed as a general-purpose replacement or addition for any system using a 0.25-inch NPT gauge port with a pressure range up to 300 psi, including compressed air lines, water supply systems, and light mechanical piping assemblies.

Installation Notes

Pressure gauges of this type are typically installed by licensed plumbers, HVAC technicians, or pipefitters following applicable IPC and IFGC guidelines. Depressurize and isolate the system completely before removing an existing gauge or installing a new one. Use thread sealant tape rated for the system fluid on the NPT threads to prevent leaks. Do not over-tighten the threaded connection, as this can crack the gauge body or distort the port fitting.