Value Collection 729204 Pressure Gauge 0-60 Psi 2.5in Npt

Product Description

The VALUE COLLECTION 729204 is a general-purpose pressure gauge designed to monitor system pressure across a wide range of trade applications. It features a 2.5-inch dial face for clear, at-a-glance readings and a 1/4-inch NPT threaded connection for straightforward installation into standard fittings. The gauge reads from 0 to 60 psi, making it suitable for low-to-medium pressure monitoring on fluid and air systems. HVAC technicians, plumbers, and mechanical contractors commonly use gauges of this type for service, testing, and permanent installation on pumps, compressors, water systems, and air lines.

This gauge fits general-purpose pressure monitoring scenarios in both residential and light commercial settings. Common install points include boiler systems, domestic water supply lines, compressed air lines, hydronic loops, and pump discharge outlets. Its 1/4-inch NPT thread is a widely used standard connection size across plumbing and HVAC system components, allowing it to thread directly into most gauge ports, tee fittings, and manifold blocks without adapters in most configurations.

Key Features

• 2.5-inch dial diameter for clear pressure readings in the field
• Pressure range of 0 to 60 psi covering common low-to-medium pressure service work
• 1/4-inch NPT thread connection compatible with standard trade fittings
• General-purpose design suited for air, water, and fluid system monitoring
• Compact form factor fits tight gauge port locations

Compatibility

Designed as a general-purpose replacement or service gauge for systems using standard 1/4-inch NPT gauge ports with a 0 to 60 psi operating range.

Installation Notes

Installation is typically performed by a licensed plumber, HVAC technician, or mechanical contractor. Before installing or removing any pressure gauge, shut off system pressure and relieve residual pressure at the gauge port. Apply thread sealant tape or pipe thread compound to the NPT threads before installation, and hand-tighten before using a wrench to avoid cracking the gauge body. Follow applicable local plumbing codes and refer to IPC or IFGC guidelines where required.