Value Collection 53075063201 Wheel Brush 3 in Crimped Brass

Product Description

The VALUE COLLECTION 53075063201 is a crimped brass wheel brush designed for surface preparation, deburring, cleaning, and light material removal on metal, wood, and composite surfaces. The brush mounts via a 1/4-inch shank, making it compatible with standard rotary tools, die grinders, and drill chucks. It runs at up to 20,000 RPM, allowing fast, controlled work in tight spaces. The 3-inch outside diameter and 3/8-inch face width provide focused contact area, while the 7/8-inch trim length gives the brass wire filaments enough flex to conform to irregular surfaces without gouging. Brass fill material is non-sparking, making this brush suitable for use near flammable residues or in environments where ferrous contamination must be avoided.

This wheel brush is used across maintenance, fabrication, and finishing applications in industrial and trade settings. Typical uses include weld spatter removal, pipe cleaning, scale removal, and surface conditioning prior to coating or inspection. The shank-mount design makes it a practical choice for technicians working with portable rotary tools in the field or at a bench. The non-encapsulated construction allows the wire to work freely across the contact surface.

Key Features

• Crimped brass wire filaments provide flexibility and a non-sparking contact surface
• 3-inch outside diameter with 3/8-inch face width for focused brushing action
• 1/4-inch shank included for direct chuck or collet mounting
• Rated to 20,000 RPM for use with high-speed rotary and die grinder tools
• 7/8-inch trim length allows wire flex to follow contoured or uneven surfaces
• Filament wire diameter up to 0.0099 inches for fine surface work without aggressive material removal

Compatibility

Designed for use with rotary tools, die grinders, and power drills fitted with a 1/4-inch chuck or collet. No specific OEM system compatibility is stated for this product.

Installation Notes

Always verify the tool spindle speed does not exceed the 20,000 RPM maximum rating before mounting this brush. Disconnect or power down the tool before securing the shank in the chuck. Wear appropriate eye protection and gloves during operation, as wire filaments can shed at high speeds. Follow applicable ANSI B165 or OSHA abrasive wheel safety guidelines when using rotary wire brushes.