Value Collection 516056 Polishing Buffing Wheel 12in

Product Description

The VALUE COLLECTION 516056 is a hard-density, single-ply unmounted polishing wheel designed for surface buffing and finishing operations. At 12 inches in diameter and 1/2 inch thick, this wheel mounts to bench grinders, lathes, and dedicated buffing machines via a 1/2 inch arbor hole. The hard wheel density makes it well suited for cutting compounds and aggressive initial polishing passes on metal, wood, or composite surfaces. At 1.29 pounds, it is light enough for extended use without added spindle load. Licensed tradespeople and experienced machinists in fabrication and finishing environments are the typical end users.

This buffing wheel is used in metalworking shops, fabrication facilities, woodworking operations, and general-purpose polishing applications. Its single-ply hard construction targets situations where firm contact and consistent compound retention are needed across flat or contoured workpieces. It is an unmounted wheel, meaning no arbor or adapter is included — the installer supplies the appropriate spindle hardware to match the 1/2 inch arbor hole size and the machine's rated RPM.

Key Features

• 12 inch diameter provides a large working surface for broad polishing coverage
• Hard wheel density delivers firm contact for cutting-compound polishing passes
• 1/2 inch arbor hole fits standard bench grinder and buffing machine spindles
• Single-ply construction for consistent thickness across the face
• Lightweight at approximately 1.29 pounds, reducing added load on spindle bearings
• Unmounted design allows use with user-supplied arbor hardware and adapters

Compatibility

Designed for use with buffing machines, bench grinders, and lathes equipped with a 1/2 inch arbor spindle that can accommodate a 12 inch diameter wheel. Always verify the machine's maximum rated wheel diameter and spindle RPM before mounting.

Installation Notes

Installation should be performed by a qualified operator familiar with abrasive and buffing wheel safety standards, including ANSI B7.1 guidelines for wheel mounting and guarding. Power down and lock out the machine before mounting or removing the wheel. Confirm that the machine's rated RPM does not exceed the wheel's maximum safe operating speed, and inspect the wheel for cracks or damage before each use. Do not force the wheel onto a spindle that does not match the 1/2 inch arbor hole specification.