Value Collection 516010 Polishing Buffing Wheel 4in

Product Description

The VALUE COLLECTION 516010 is an unmounted polishing buffing wheel designed for surface finishing and polishing applications across a range of materials. Measuring 4 inches in diameter and 1 inch thick with a 1/2 inch arbor hole, this wheel mounts directly to standard bench grinders, lathes, or buffing machines without additional hardware. Its soft density construction makes it well suited for final-stage polishing passes where aggressive cutting action is not required. At a single ply, the wheel maintains a consistent, pliable contact surface that conforms lightly to workpiece contours. Tradespeople and shop technicians use this style of wheel for polishing metal fittings, fasteners, and finished components.

This polishing wheel is appropriate for light-duty buffing work in fabrication shops, HVAC and plumbing fitting preparation, electrical enclosure finishing, and general maintenance environments. It is commonly used in bench-top setups where a loose or sewn muslin-style wheel is overkill and a softer, single-ply wheel provides the right balance of compliance and surface contact. The 1/2 inch arbor hole fits widely available arbor spindles on standard bench grinders and polishing motors.

Key Features

• 4 inch diameter provides adequate face area for small-to-medium workpiece polishing
• 1 inch wheel thickness for stable, consistent contact during buffing passes
• 1/2 inch arbor hole fits standard bench grinder and buffing motor spindles
• Soft density construction suited for finish polishing rather than aggressive cutting
• Single-ply build delivers a pliable, conforming surface contact
• Lightweight at 0.19 pounds, reducing spindle load on smaller motors

Compatibility

Designed as an OEM-style replacement or standard consumable for bench grinders, lathes, and buffing machines equipped with a 1/2 inch arbor spindle.

Installation Notes

Installation is performed by qualified shop technicians or tradespeople familiar with bench grinder and buffing motor setups. Power down and disconnect the machine from its power source before mounting or removing any wheel. Verify the arbor spindle size matches the 1/2 inch arbor hole before seating the wheel, and confirm all guards and flanges are properly seated before operation. Do not exceed the rated RPM of the wheel or the buffing machine.