Value Collection 452-003NL 1/2 Inch Mpt 90 Street Elbow 125 Psi

Product Description

The VALUE COLLECTION 452-003NL is a 90-degree street elbow fitting machined from red brass, designed for use in threaded pipe systems operating at up to 125 psi. The fitting measures 1/2 inch and connects via male pipe threads (MPT) on both ends, allowing a direct in-line directional change without the need for an additional coupling. Class 125 rated, it is suited for low-to-medium pressure water, air, and compatible fluid service lines. Plumbers and pipefitters install this type of fitting during rough-in and repair work on residential and light commercial systems.

This street elbow is used wherever a 90-degree turn is required in a 1/2 inch threaded pipe run. Typical applications include domestic water supply lines, compressed air distribution, and similar fluid handling systems where red brass construction provides adequate corrosion resistance. The MPT end connections thread directly into female-threaded (FPT) ports on valves, manifolds, tees, or pipe couplings without additional adapters.

Key Features

• 90-degree street elbow configuration for in-line directional changes in threaded pipe runs
• 1/2 inch fitting size with MPT end connections on both ends
• Class 125 pressure rating at 125 psi for low-to-medium pressure service
• Red brass construction for corrosion resistance in water and air service
• Compact profile reduces the need for additional couplings in tight installations

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 1/2 inch female-threaded (FPT) ports on valves, manifolds, and pipe assemblies rated for Class 125 service.

Installation Notes

Installation is performed by licensed plumbers or qualified pipefitters following applicable IPC and local plumbing code requirements. Shut off and depressurize the supply line before threading or unthreading any fittings. Apply an appropriate thread sealant or PTFE tape to the MPT threads before assembly and tighten to hand-tight plus wrench-snug — do not overtighten brass fittings, as excess torque can crack the fitting body. Pressure-test the assembly after installation before returning the system to service.