Value Collection 429-060 Pvc Pipe Coupling 6 in Sch 40

Product Description

The VALUE COLLECTION 429-060 is a 6-inch Schedule 40 PVC pipe coupling designed for joining same-diameter PVC pipe sections in drain, waste, vent, and cold-water supply systems. With slip x slip end connections, the fitting accepts standard PVC pipe on both ends and is solvent-welded in place for a permanent, pressure-rated joint. Weighing 3.56 pounds, this full-size coupling is appropriate for commercial and residential plumbing rough-in work where Schedule 40 wall thickness is specified. Licensed plumbers and pipefitters are the typical installers of fittings at this diameter.

This coupling is suited for 6-inch Schedule 40 PVC piping systems in residential and commercial applications including gravity-drain sewer laterals, storm drainage, industrial process lines, and large-diameter vent stacks. The slip x slip configuration requires solvent cement on both sockets, making it straightforward to install in new construction or open-cut replacement scenarios where pipe ends are accessible and cut square.

Key Features

• 6-inch fitting size matches standard Schedule 40 PVC pipe OD
• Schedule 40 wall thickness for full pressure and drain service ratings
• Slip x Slip end connections accept solvent-welded PVC pipe on both ends
• PVC construction resists corrosion, chemical attack, and scale buildup
• Lightweight relative to cast iron or steel fittings at the same diameter

Compatibility

Designed as an OEM-style replacement and standard-stock fitting for 6-inch Schedule 40 PVC piping systems following ASTM D1785 dimensional standards.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) or applicable local codes. Pipe ends must be cut square, deburred, and cleaned before applying PVC primer and solvent cement rated for the pipe schedule and service type. Allow full cure time per the cement manufacturer instructions before pressurizing or backfilling the line. Do not use this fitting with CPVC, ABS, or other pipe materials without confirming chemical and dimensional compatibility.