Value Collection 417-025 Pvc 45 Elbow 2-1/2 in Slip Sch 40

Product Description

The VALUE COLLECTION 417-025 is a Schedule 40 PVC 45-degree elbow fitting designed for use in plastic piping systems where a mid-angle directional change is required. Sized at 2-1/2 inches with slip x slip end connections, this fitting accepts standard solvent-weld joints on both ends. Schedule 40 wall thickness provides adequate pressure ratings for typical residential and light commercial plumbing and irrigation applications. At 1.48 pounds, it is a solid, full-size fitting suitable for professional installation in drain, waste, vent, and pressure piping systems within the appropriate temperature and pressure ratings for Schedule 40 PVC.

This fitting is used in residential and commercial plumbing, irrigation, industrial fluid handling, and pool or spa piping where a 45-degree change in flow direction is needed. It is well-suited for both above-ground and below-grade installations where PVC is code-approved. Plumbers, pipefitters, irrigation contractors, and pool service technicians commonly work with this size and configuration when routing lines around structural obstructions or changing pipe direction at a moderate angle.

Key Features

• 45-degree elbow geometry for mid-angle directional changes in PVC piping runs
• 2-1/2 inch fitting size accommodates standard Schedule 40 PVC pipe
• Slip x slip end connections for solvent-weld installation on both ends
• Schedule 40 construction meets standard wall-thickness requirements for pressure and DWV applications
• PVC material resists corrosion and is compatible with a wide range of fluids handled in trade piping systems

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 2-1/2 inch Schedule 40 PVC piping systems using solvent-weld slip connections.

Installation Notes

Installation should be performed by a licensed plumber or qualified pipefitter in accordance with applicable local plumbing codes and ASTM standards for PVC solvent-weld joints. Before cutting into any existing line, shut off the water supply and relieve system pressure completely. Use the correct PVC primer and solvent cement rated for Schedule 40 fittings, and allow adequate cure time before pressurizing the system. Do not use this fitting beyond the pressure and temperature limits specified for Schedule 40 PVC.