Value Collection 417-010 Pvc 45 Elbow 1 Inch Sch 40

Product Description

The VALUE COLLECTION 417-010 is a 1-inch Schedule 40 PVC 45-degree elbow fitting used to change flow direction in plastic piping systems. Constructed from PVC, this fitting accepts slip connections on both ends, allowing solvent-cement joining for a secure, permanent bond. At 0.53 pounds, it is lightweight and easy to handle on the job. Schedule 40 wall thickness makes it suitable for standard-pressure residential and light commercial plumbing, irrigation, and drainage applications. Plumbers and pipe fitters install this type of fitting where a moderate directional change is required without the abrupt turn of a 90-degree elbow.

This 45-degree elbow is used in residential and light commercial water distribution, drain-waste-vent (DWV) systems, irrigation lines, and pool and spa plumbing where PVC Schedule 40 pipe is specified. The slip x slip end connections accommodate standard 1-inch PVC pipe. It is appropriate for above-ground and in-wall installations where PVC is code-approved for the application.

Key Features

• 1-inch fitting size for use with standard 1-inch Schedule 40 PVC pipe
• 45-degree elbow geometry provides a gradual directional change with lower flow resistance than a 90-degree elbow
• Slip x slip end connections accept solvent-cement bonding for a leak-free joint
• Schedule 40 wall thickness rated for standard working pressures in water service applications
• PVC construction is corrosion-resistant and compatible with most water, irrigation, and pool plumbing fluids
• Lightweight at 0.53 pounds for easy handling and installation

Compatibility

Designed as an OEM-style replacement or new-installation fitting compatible with standard 1-inch Schedule 40 PVC pipe systems using solvent-cement slip connections.

Installation Notes

Installation is typically performed by a licensed plumber in accordance with the International Plumbing Code (IPC) or applicable local codes. Before cutting into an existing line, shut off the water supply and relieve system pressure. Clean and dry pipe ends, apply PVC primer, then solvent cement to both the pipe and fitting socket before joining. Allow full cure time per the cement manufacturer instructions before restoring flow or pressure-testing the line.