Value Collection 407-007 Pvc 90 Elbow 3/4 Inch Sch 40

Product Description

The VALUE COLLECTION 407-007 is a 3/4 inch Schedule 40 PVC 90 degree elbow fitting used to change flow direction in pressurized and non-pressurized plastic piping systems. One end connects via slip socket, and the other connects via female iron pipe thread (FIPT), allowing a transition between solvent-weld PVC pipe and a threaded male fitting or valve. This fitting is installed by licensed plumbers and experienced pipefitters working on residential and light commercial plumbing, irrigation, and water distribution systems. At 0.46 pounds, it is lightweight and easy to handle in tight spaces.

This fitting is suited for cold and hot water supply lines, irrigation laterals, pool and spa plumbing, and general water distribution where a 90 degree directional change is required. The slip end accepts standard 3/4 inch PVC pipe for solvent cement joining, while the FIPT end threads onto a compatible male NPT fitting, valve, or pump port. Schedule 40 wall thickness makes it appropriate for standard residential water pressure service conditions.

Key Features

• Schedule 40 wall thickness rated for standard residential water service pressures
• Slip x FIPT end connections allow solvent-weld pipe on one end and threaded connection on the other
• 3/4 inch fitting size fits standard 3/4 inch PVC pipe and 3/4 inch male NPT threads
• PVC construction resists corrosion, scale, and chemical degradation in water service
• Lightweight at 0.46 pounds for easy single-hand installation in confined spaces

Compatibility

Designed as an OEM-style replacement or new-installation fitting for standard 3/4 inch Schedule 40 PVC piping systems using solvent-cement slip joints and NPT threaded connections.

Installation Notes

Installation is performed by licensed plumbers following applicable IPC and local plumbing code requirements. Shut off water supply and depressurize the line before cutting or disassembling any existing piping. Apply PVC primer and solvent cement to the slip end per the cement manufacturer instructions and ASTM D2564 guidelines. Thread the FIPT end onto the male NPT fitting by hand first, then tighten with a strap wrench or pipe wrench using thread sealant tape or compound rated for PVC.