Value Collection 395-1006 Keyway Broach Style a 3/32 in Hss

Product Description

The VALUE COLLECTION 395-1006 is a Style A keyway broach machined from high speed steel for cutting keyways in ferrous and non-ferrous metal workpieces. With a keyway width of 3/32 inches and a body width of 1/8 inch, this broach handles cutting lengths from 13/64 inches up to 1-1/8 inches. The overall length is 5 inches. A bright finish is applied to the tool surface. No shims are required for use, and the keyway width tolerance is held to 0.0948 inches. This broach is used by machinists and toolroom technicians working on shafts, hubs, and bores that require a precise keyway slot.

This broach is suited for production and repair applications where a standard Style A keyway profile is required in both ferrous and non-ferrous metals. Typical use cases include cutting keyways in shaft hubs, pulleys, gears, and sprockets. The tool is sized for benchtop or arbor press operation in a machine shop or maintenance environment. It is sold individually and is appropriate where low-volume or single-piece keyway cutting is needed without a full broach set.

Key Features

• Style A keyway broach profile for standard keyway slot cutting
• High speed steel construction for durability in ferrous and non-ferrous metals
• Keyway width of 3/32 inches with a tolerance of 0.0948 inches
• Cutting length range from 13/64 inches to 1-1/8 inches
• No shims required — ready to use as supplied
• Bright finish applied to tool surface

Compatibility

Designed as an OEM-style cutting tool for use in arbor presses and broaching fixtures that accept Style A keyway broaches sized for 3/32 inch keyway widths in ferrous and non-ferrous metal workpieces.

Installation Notes

This tool is typically installed and operated by machinists or tool and die technicians using an arbor press or hydraulic press with appropriate broach fixtures. Ensure the workpiece is securely fixtured and properly supported before pressing the broach through the bore. Cutting fluid or lubricant appropriate for the workpiece material should be applied to the broach before use. Inspect the broach for chipping or wear before each use to avoid dimensional inaccuracy or tool breakage.