Value Collection 383-8012 FR-10 Single-point Tool Bit C2 Carbide

Product Description

The VALUE COLLECTION 383-8012 is an FR-style single-point tool bit designed for offset end cutting operations on metal lathes and turning centers. Built to industry standard FR-10 specifications, it features a C2-grade solid carbide tip brazed to a 5/8 inch by 5/8 inch square shank. The right-hand cutting direction and 1/32 inch nose radius make it well-suited for straddle facing, turning, and facing-to-shoulder operations where precise corner geometry and consistent chip control are required. Overall length is 4 inches. Total weight is 1.03 pounds. This tool bit is installed and used by machinists and toolroom technicians working on manual or CNC turning equipment.

This tool bit is intended for straddle facing, general turning, and facing-to-shoulder applications on ferrous and non-ferrous materials. The C2 carbide grade performs well on cast iron, steel, and aluminum at moderate cutting speeds. Its offset end cutting geometry makes it the right choice when tool clearance at the shoulder or face is required during turning operations. Typical applications include production turning, job-shop lathe work, and toolroom machining where an FR-style geometry is specified.

Key Features

• FR-10 industry standard number for straightforward cross-referencing and replacement
• C2-grade solid carbide tip for wear resistance and consistent edge life on common workpiece materials
• 5/8 inch shank height and 5/8 inch shank width for standard lathe tool post fitment
• 1/32 inch nose radius balances surface finish quality with edge strength
• Offset end cutting geometry supports straddle facing and facing-to-shoulder operations
• Right-hand cutting direction for standard lathe rotation setups

Compatibility

Designed as an OEM-style replacement or standard fitment for lathe tool posts and turning center holders accepting a 5/8 inch square shank single-point tool bit in the FR-10 geometry class.

Installation Notes

Installation is performed by machinists or toolroom technicians. Before mounting, ensure the lathe or turning center is fully powered down and the spindle is at rest. Secure the shank in the tool post to the full recommended engagement depth — typically no less than 1.5 times shank width — to prevent chatter and tip stress. Do not exceed the cutting parameters appropriate for C2 carbide on the workpiece material being machined.