Value Collection 37073 304 Ss Welded Tube 1 in Od 6 Ft

Product Description

The VALUE COLLECTION 37073 is a welded 304 stainless steel tube sized at 1 inch outside diameter with a 0.065 inch wall thickness and a 6-foot length. The inside diameter measures 0.870 inches. Grade 304 stainless steel offers reliable corrosion resistance and weldability, making this tube suitable for fluid transfer lines, structural supports, and mechanical assemblies in trade and light industrial settings. It is typically handled by plumbers, pipefitters, HVAC fabricators, and mechanical contractors who require a consistent, off-the-shelf tube stock for fabrication or replacement work.

This tube is suited for residential and light commercial applications where a corrosion-resistant, welded tube is required. Common uses include drain lines, condensate management systems, heat exchanger fabrication, and structural framing in wet or chemically active environments. The 6-foot length provides enough material for most standard single-run fabrications without splicing. The welded construction is appropriate for non-critical pressure applications where seamless tubing is not specified.

Key Features

• 304 stainless steel construction for corrosion resistance in wet and mildly corrosive environments
• Welded tube construction suitable for non-pressure-critical mechanical and fluid applications
• 1 inch outside diameter with 0.870 inch inside diameter for straightforward sizing and fitting selection
• 0.065 inch wall thickness provides a balance of structural rigidity and material weight
• 6-foot stock length reduces the need for on-site splicing in standard runs

Compatibility

Designed as a general-purpose 304 stainless steel welded tube for use in plumbing, HVAC, and mechanical fabrication applications requiring 1 inch OD tube stock.

Installation Notes

Installation should be performed by a qualified pipefitter, plumber, or mechanical contractor in accordance with applicable IPC or IFGC guidelines. Cut tube ends should be deburred before fitting to prevent seal damage or flow restriction. Verify that welded tube construction is acceptable per the project specification before installing in pressure-rated systems. Shut off and depressurize any connected system before removing or replacing existing tube sections.