Value Collection 370024PS M10 Flat Washer Zinc-plated

Product Description

The VALUE COLLECTION 370024PS is a standard flat washer designed for use with M10 fasteners. Made from steel with a zinc-plated finish, this washer distributes load across the fastener bearing surface to reduce surface damage and prevent fastener pull-through. It measures 10.5mm inside diameter, 20mm outside diameter, and 2mm thick. The zinc plating provides a layer of corrosion resistance suited to general-purpose indoor and light outdoor applications. Plumbers, electricians, HVAC technicians, and general contractors routinely use flat washers like this in structural connections, equipment mounting, and piping support installations.

This washer conforms to DIN 125 and ISO 7089/7090 fastener standards and is sized to the metric M10 screw standard. It is a common choice in both residential and light commercial construction and mechanical assembly where a standardized metric flat washer is required. Typical applications include equipment mounting brackets, conduit supports, pipe hangers, ductwork support hardware, and general mechanical assemblies using M10 bolts or screws.

Key Features

• Steel construction with zinc-plated finish for corrosion resistance in general-purpose applications
• Sized for M10 fasteners with 10.5mm inside diameter and 20mm outside diameter
• 2mm thickness provides consistent load distribution under the fastener head or nut
• Meets DIN 125, ISO 7089, and ISO 7090 fastener standards
• Hardness rated at 140 HV for reliable performance under clamping load
• Metric measurement system for compatibility with metric fastener assemblies

Compatibility

Designed for use with M10 metric screws and bolts in standard flat washer applications conforming to DIN 125, ISO 7089, and ISO 7090 specifications.

Installation Notes

Install with the washer seated flat against the mating surface, positioned between the fastener head or nut and the workpiece. Power down or de-energize any equipment before working on fastened assemblies in electrical or mechanical systems. Use the appropriate metric torque wrench or driver to avoid deforming the washer under excessive clamping load. Follow applicable code requirements for the trade and application when specifying fastener hardware for structural or pressure-bearing connections.