Value Collection 36969 Seamless Ss Tube 7/8 in Od 304 6-7 Ft

Product Description

The VALUE COLLECTION 36969 is a seamless 304 stainless steel tube designed for applications requiring precise dimensional tolerances and corrosion resistance. It measures 7/8 inch outside diameter with a 0.065-inch wall thickness, yielding an inside diameter of 0.745 inches. Available lengths run from 6 to 7 feet (72 to 84 inches). The seamless construction eliminates weld seams, which is important in pressure, fluid transfer, and structural tubing applications. Plumbers, HVAC fabricators, and industrial pipefitters commonly specify this tube type where 304 stainless provides adequate resistance to oxidation and mild corrosive environments.

This tube is suited for both light commercial and industrial installations where stainless steel is required by code or system design. Typical applications include instrument tubing runs, process fluid lines, heat exchanger support structures, and fabricated mechanical assemblies. The 304 grade performs reliably in dry and wet service conditions at moderate temperatures, making it a standard specification in mechanical and plumbing system work.

Key Features

• Seamless construction — no weld seam, consistent wall thickness throughout
• 304 stainless steel material grade for corrosion resistance in a wide range of service environments
• 7/8 inch outside diameter with 0.065-inch wall thickness
• Inside diameter of 0.745 inches for accurate flow and fit calculations
• Length range of 6 to 7 feet (72 to 84 inches) per piece
• Weighs approximately 3.93 pounds per unit

Compatibility

Designed as a standard-specification seamless stainless steel tube for use in plumbing, HVAC fabrication, instrumentation, and general mechanical applications requiring 304-grade stainless with 7/8 inch OD and 0.065-inch wall thickness.

Installation Notes

Installation should be performed by a licensed plumber, pipefitter, or qualified mechanical contractor in accordance with applicable codes such as the IPC or ASME B31.1/B31.3 where relevant. Shut off all fluid supply and depressurize the system before cutting or fitting this tube. Use tube cutters or saws rated for stainless steel to avoid work-hardening the cut edge, and deburr all cut ends before assembly. Do not substitute this tube in pressure applications without verifying that the wall thickness and grade meet system design requirements.