Value Collection 36961 Seamless Ss Tube 7/8 Od 304 6-7 Ft

Product Description

The VALUE COLLECTION 36961 is a seamless 304 stainless steel tube designed for industrial, mechanical, and fluid-handling applications where corrosion resistance and dimensional consistency are critical. It measures 7/8 inch outside diameter with a 0.049 inch wall thickness, yielding an inside diameter of 0.777 inch. The tube is available in lengths ranging from 6 to 7 feet (72 to 84 inches). Seamless construction eliminates weld seams, which reduces the risk of weak points under pressure or cyclic stress. Plumbers, pipefitters, and mechanical contractors working with instrumentation, hydraulic lines, or process piping commonly specify this type of tube.

This tube is suited for residential and light commercial mechanical systems, as well as industrial process and instrumentation lines where 304 stainless steel meets the corrosion and temperature requirements. It is a general-purpose seamless tube appropriate for use in fabrication shops, HVAC refrigerant lines built to custom specs, plumbing rough-in, and structural or support applications where a corrosion-resistant alloy is needed. The seamless 304 grade performs well in mildly corrosive environments and moderate temperature ranges.

Key Features

• Seamless construction for uniform wall thickness and higher pressure integrity
• 304 stainless steel alloy for corrosion resistance in a broad range of environments
• 7/8 inch outside diameter with 0.049 inch wall and 0.777 inch inside diameter
• Available in 6 to 7 foot lengths (72 to 84 inches) per piece
• Weighs approximately 3.02 pounds per length

Compatibility

Designed as a general-purpose seamless stainless steel tube for fabrication, mechanical, and fluid-handling applications requiring 7/8 inch OD 304-grade tubing.

Installation Notes

Installation should be performed by a licensed pipefitter, plumber, or qualified mechanical tradesperson familiar with applicable codes such as ASME B31.1 or B31.3 for pressure piping. Deburr all cut ends before assembly to prevent flow restriction or seal damage. Verify that fittings and compression sleeves are rated for the tube outside diameter and wall thickness before making connections. Always depressurize and isolate the system before cutting into an existing line.