Value Collection 36569 316 Ss Seamless Tube 1/2 in Od

Product Description

The VALUE COLLECTION 36569 is a seamless 316 stainless steel tube intended for industrial, mechanical, and fluid-handling applications requiring corrosion resistance and dimensional precision. With a 1/2 inch outside diameter and a 0.095 inch wall thickness, the tube yields an inside diameter of 0.310 inches. The seamless construction eliminates longitudinal weld seams, which reduces the risk of stress concentration and improves pressure-bearing consistency along the full length. Each piece runs 6 to 7 feet long and weighs approximately 2.88 pounds. Plumbers, pipefitters, and mechanical contractors working with corrosive media, high-purity systems, or marine-adjacent environments are the primary installers.

This tube is suited for applications where 316-grade stainless steel is specified for its molybdenum content and enhanced resistance to chloride-induced pitting. Typical use cases include instrumentation lines, hydraulic tubing runs, chemical transfer systems, HVAC refrigerant or condensate piping in corrosive environments, and sanitary process piping. The 6 to 7 foot random-length format is common for custom fabrication work where the installer cuts to final dimension on site.

Key Features

• Seamless construction for consistent wall thickness and no weld-seam weak points
• 316 stainless steel material grade with molybdenum for superior chloride and pitting resistance
• 1/2 inch outside diameter with 0.095 inch wall and 0.310 inch inside diameter
• 6 to 7 foot length suitable for custom cut-to-length fabrication
• Approximately 2.88 pounds per piece

Compatibility

Designed as an OEM-style or fabrication-grade seamless tube for mechanical, instrumentation, and fluid-handling systems that call out 1/2 inch OD 316 stainless steel seamless tubing with a 0.095 inch wall thickness.

Installation Notes

Installation should be performed by a licensed pipefitter, plumber, or mechanical contractor familiar with stainless steel tube fabrication. Cut to length using a tube cutter or abrasive saw rated for stainless steel, and deburr all cut ends before fitting. Shut off and depressurize any system before removing existing tubing or making new connections. Follow applicable codes such as ASME B31.1, B31.3, or the IPC depending on the system type and jurisdiction.