Value Collection -34142-X Blind Rivet Size 66 1000 Pack

Product Description

The VALUE COLLECTION -34142-X is an open end blind rivet designed for fastening applications where access to only one side of the workpiece is available. The rivet features a large flange dome head with a 5/8 inch head diameter, an aluminum body in alloy grade 5056, and a steel mandrel with phosphate finish. Body diameter is 3/16 inch, grip range spans 0.251 to 0.375 inches, and the length under head measures 0.575 inches. Tensile strength is rated at 500 pounds and shear strength at 380 pounds. This rivet is installed by HVAC fabricators, sheet metal workers, and general tradespeople using a standard blind rivet tool.

The -34142-X suits light- to medium-gauge sheet metal assembly, HVAC ductwork, enclosures, brackets, and general structural fastening where a wide-flange head is needed to distribute clamping load across a larger bearing surface. The large flange dome head style reduces pull-through risk on softer or thinner substrates. The aluminum body with bright finish resists corrosion in typical indoor and moderate-exposure environments. This SKU ships in a quantity of 1000 rivets per package, making it practical for production or service-fleet use.

Key Features

• Open end design sets with a standard blind rivet pulling tool — no rear access required
• Large flange dome head at 5/8 inch diameter distributes load and reduces pull-through
• Aluminum 5056 alloy body provides corrosion resistance with low installed weight
• Steel mandrel with phosphate finish for reliable mandrel break and pull strength
• Tensile strength of 500 pounds and shear strength of 380 pounds
• Grip range of 0.251 to 0.375 inches accommodates a range of material stack thicknesses
• Package quantity of 1000 rivets per pack for production and fleet service efficiency

Compatibility

Designed for use in applications requiring a size 66 blind rivet with a 3/16 inch body diameter and a drill or hole size of No. 11 wire gauge (0.192 to 0.196 inch hole diameter). Compatible with standard manual, pneumatic, and battery-powered blind rivet tools that accept 3/16 inch body rivets.

Installation Notes

Installation is performed using a blind rivet pulling tool sized for 3/16 inch body rivets. Drill or punch the workpiece to the specified hole diameter of 0.192 to 0.196 inches before insertion. Inspect each set rivet to confirm the mandrel has broken cleanly and the head is fully seated against the workpiece surface. Follow applicable structural or sheet metal fabrication standards for rivet spacing and edge distance requirements.