Value Collection 34128 Blind Rivet Size 610 Aluminum Pack 100

Product Description

The VALUE COLLECTION 34128 is an open end blind rivet with a large flange dome head, designed for fastening applications where access is limited to one side of the workpiece. The body and mandrel are both aluminum with a bright finish, making this rivet suitable for lightweight assemblies where corrosion resistance and clean appearance matter. The body diameter is 3/16 inches and the head diameter is 0.615 inches. Grip range runs from 0.501 inches to 0.625 inches, covering a practical spread of material thicknesses. Tensile strength is rated at 515 pounds and shear strength at 330 pounds. This rivet is sold in a package of 100 and meets IFI 114 Grade 11 standards.

This rivet is used in sheet metal fabrication, HVAC ductwork assembly, enclosure manufacturing, and general industrial fastening where a large-flange dome head is needed to distribute clamping load over a wider bearing surface. The open end design allows the mandrel to pull through fully during installation. Typical applications include joining thin aluminum panels, light-gauge steel, and similar materials in both shop and field settings. Installers working on duct systems, electrical enclosures, or equipment housings will find this size appropriate for standard 3/16-inch hole patterns.

Key Features

• Large flange dome head distributes clamping load over a wider surface area, reducing pull-through risk in thin materials
• Aluminum body and aluminum mandrel offer lightweight construction with natural corrosion resistance
• Grip range of 0.501 inches to 0.625 inches accommodates varying material stack-up thicknesses
• 515-pound tensile strength and 330-pound shear strength for reliable mechanical performance
• Meets IFI 114 Grade 11 fastener standard
• Bright finish; package quantity of 100 units

Compatibility

Designed for use in standard 3/16-inch diameter holes (minimum 0.192 inches, maximum 0.196 inches) drilled with a No. 11 wire gauge drill bit; compatible with blind rivet tools accepting 3/16-inch body diameter rivets.

Installation Notes

Installation requires a standard blind rivet pulling tool sized for 3/16-inch body rivets. Drill the mating hole to the specified diameter range before setting the rivet; oversized holes will reduce clamp load and joint strength. Ensure the workpiece is secure and all power to adjacent electrical components is off before drilling in live panel or enclosure work. The mandrel stem will eject upon full setting and should be collected to prevent foreign object damage in nearby equipment.