Value Collection 33006 Square End Mill 3/32 in Solid Carbide

Product Description

The VALUE COLLECTION 33006 is a solid carbide square end mill designed for precision milling operations in metalworking, toolmaking, and general machining applications. With a 3/32 inch (0.0938 inch) cutting diameter and a 3/8 inch length of cut, this end mill handles slotting, profiling, and plunge cutting in a compact form factor. The micrograin carbide construction provides hardness and wear resistance suitable for cutting ferrous and non-ferrous materials. A 30-degree helix angle promotes efficient chip evacuation, and the three-flute spiral configuration balances chip load and surface finish. This tool ships uncoated and is intended for use by machinists and toolroom professionals.

This end mill fits standard CNC machining centers, manual milling machines, and high-speed spindles that accept a 1/8 inch shank diameter. The regular-length geometry and 1-1/2 inch overall length make it well-suited for close-quarter milling passes and small-part work where larger tools cannot reach. The centercutting design allows direct plunge entry into workpiece material without pre-drilling. Right-hand cut and right-hand flute orientation are compatible with standard spindle rotation on the vast majority of vertical milling setups.

Key Features

• Solid micrograin carbide construction for hardness and extended tool life
• Three spiral flutes with a 30-degree helix angle for efficient chip evacuation
• Centercutting geometry allows direct plunge milling without pre-drilling
• Right-hand cut and right-hand flute for standard spindle compatibility
• Uncoated finish suitable for a wide range of base materials
• Square shank type with tight diameter tolerances: +0.000 / -0.002 inches on cutting diameter

Compatibility

Designed as a standard replacement or new-installation square end mill for milling machines and CNC machining centers accepting a 1/8 inch straight shank, Series 3300 tooling family.

Installation Notes

Installation should be performed by a qualified machinist following shop safety procedures. Power down and lock out the spindle before inserting or removing the tool from the collet or tool holder. Confirm collet size matches the 1/8 inch shank diameter before clamping, and verify runout with a dial indicator before cutting. Do not exceed the tool manufacturer's recommended feed and speed parameters for the workpiece material.