Value Collection 32862-88 Deep Groove Ball Bearing

Product Description

The VALUE COLLECTION 32862-88 is a flanged, single-row deep groove ball bearing designed for rotating shaft applications in industrial and mechanical assemblies. The bearing features a 0.75 inch bore diameter with a round bore profile and a double-seal design that retains lubrication and blocks contaminants without requiring a separate housing seal. The carbon steel housing provides durability under moderate radial loads. With a dynamic load capacity of 1,171 pounds and a maximum rated speed of 2,500 RPM, this bearing suits light to medium-duty drive and conveyor shaft applications. The flange mount simplifies positioning and retention in housings without snap rings or additional hardware.

This bearing is suited for use in light industrial machinery, small conveyor systems, pump assemblies, and general-purpose mechanical equipment where a compact, flanged bearing mount is required. The double-seal configuration makes it appropriate for environments with moderate dust or moisture exposure. Maintenance technicians and mechanical assemblers typically install this bearing in production, agricultural, and facility equipment requiring reliable shaft support at lower to moderate rotational speeds.

Key Features

• Flanged housing for simplified axial positioning in bearing pockets
• Double-seal design retains grease and excludes contaminants
• 0.75 inch round bore with 0.562 inch inner ring width
• Carbon steel housing construction for moderate-duty applications
• Rated to 2,500 RPM maximum operating speed
• 1,171 pound dynamic load capacity

Compatibility

Designed as an OEM-style replacement or direct-fit bearing for light industrial and general mechanical equipment requiring a flanged, double-seal deep groove ball bearing with a 0.75 inch bore diameter.

Installation Notes

Installation should be performed by a qualified mechanical technician. De-energize and lock out all power to the equipment before removing or installing the bearing. Press the bearing into its housing evenly using a proper bearing press or sleeve driver applied to the outer race only — never strike the inner race or seal face. Verify shaft and housing dimensions conform to bearing tolerances before installation to avoid premature failure.