Value Collection 324629 Flap Wheel 180 Grit 8x1 in

Product Description

The VALUE COLLECTION 324629 is an unmounted aluminum oxide flap wheel designed for surface finishing, blending, and light material removal on metal, wood, and composite surfaces. At 8 inches in diameter and 1 inch wide with a 1-inch center hole, this coated abrasive wheel mounts on compatible spindles and arbors for use with bench grinders, rotary tools, and automated finishing equipment. The 180 grit rating places it in the very fine grade range, making it suited for final-pass finishing and surface prep rather than aggressive stock removal. Cloth backing with X-weight construction provides durability and flexibility under load. Maximum operating speed is 4,500 RPM.

This flap wheel is used in metalworking shops, fabrication facilities, and industrial maintenance settings where consistent surface finish is required. It is appropriate for deburring, polishing, and blending weld seams or machined edges on ferrous and non-ferrous metals. The unmounted design requires a separate spindle or arbor to match the 1-inch center hole before installation. Typical users include machinists, fabricators, and maintenance technicians working on production or repair applications.

Key Features

• 180 grit very fine grade aluminum oxide abrasive for finish-pass surface work
• Coated abrasive construction on X-weight cloth backing for durability and flexibility
• 8-inch outside diameter with 1-inch width and 1-inch center hole for standard arbor mounting
• Rated to 4,500 RPM maximum operating speed
• No interleaf construction for direct abrasive contact
• Suitable for metal, wood, and composite surface blending and finishing

Compatibility

Designed for use with spindles and arbors accepting a 1-inch center hole mounting. Suitable for bench grinders, rotary finishing machines, and drill press setups configured for unmounted flap wheel abrasives.

Installation Notes

Installation should be performed by a qualified machinist or maintenance technician familiar with abrasive wheel mounting procedures. Confirm the spindle or arbor speed does not exceed the 4,500 RPM maximum rating before operation. Inspect the wheel for damage before mounting and ensure all guards are in place per ANSI B11 and applicable shop safety requirements. Never exceed the marked maximum RPM and always allow the wheel to reach full speed before engaging the workpiece.