Value Collection 32420-01 Deep Groove Ball Bearing

Product Description

The VALUE COLLECTION 32420-01 is an open-style, flanged deep groove ball bearing designed for light-duty rotational applications in industrial and mechanical systems. With a 0.5-inch bore diameter and a round bore configuration, this bearing accepts standard shaft sizes and mounts securely using its integral flange. The unground full complement design maximizes load-carrying surface area within the housing. A dynamic load capacity of 769 pounds makes it suited for moderate radial loads at controlled speeds. Carbon steel construction provides adequate strength for general-purpose use. Licensed technicians, millwrights, and maintenance mechanics typically specify this type of bearing in conveyor systems, small motors, and pump assemblies.

This bearing fits applications requiring a flanged housing interface with a 0.5-inch round bore. The 1.5-inch flange outside diameter and 1/16-inch flange width allow the bearing to seat against a mounting face and resist axial displacement without additional hardware. The inner ring width of 15/32 inch (0.468 inches) suits compact shaft spans. Maximum rated speed is 1,500 RPM, making this bearing appropriate for low-to-moderate speed drives rather than high-speed spindle or precision applications. No snap ring is included or required for this design.

Key Features

• Open style with integral flange for face-mount installation without a snap ring
• Unground full complement design increases radial load distribution
• Carbon steel housing material for general-purpose mechanical environments
• 769-pound dynamic load capacity suitable for moderate radial loads
• 1,500 RPM maximum speed rating for low-to-moderate drive applications
• Round bore accepts standard 0.5-inch shafts without additional machining

Compatibility

Designed as an OEM-style replacement or direct-fit bearing for mechanical assemblies requiring a flanged, open-style deep groove ball bearing with a 0.5-inch round bore and 1.5-inch flange outside diameter.

Installation Notes

Installation is typically performed by millwrights or qualified maintenance mechanics. Shut down and lock out all power to the host machine before removing the worn bearing or inserting the replacement. Press the bearing onto the shaft evenly using a bearing press or appropriate driver tool — never strike the outer race to seat it onto the shaft. Verify shaft diameter tolerance and housing bore finish before installation to prevent premature wear or race creep.