Value Collection 310-008-121 Liquid Bag Filter 400 Micron

Product Description

The VALUE COLLECTION 310-008-121 is a Size 1 liquid bag filter rated at 400 microns and designed for industrial and commercial liquid filtration systems. Constructed from mesh polyester, this bag filter captures particulate from process fluids, coolants, and water-based media at flow rates up to 90 GPM. The filter measures 7 inches in diameter and 16.5 inches in length, providing 2.5 square feet of filtration area. It is rated for operating temperatures up to 300 degrees F. Licensed plumbers, pipefitters, and industrial maintenance technicians typically install and service this type of filter in pressurized liquid lines.

This filter is suited for Size 1 filter housing applications in light industrial, commercial water treatment, process fluid systems, and similar liquid filtration setups. The 400 micron rating makes it appropriate for coarse pre-filtration stages where larger particulate loads are expected. At a maximum flow rate of 90 GPM, it handles moderate to high-volume liquid throughput without excessive pressure drop across the bag media.

Key Features

• 400 micron rating for coarse particulate removal from liquid streams
• Maximum flow rate of 90 GPM supports moderate to high-volume applications
• Mesh polyester construction resists common process fluids and elevated temperatures
• Rated to 300 degrees F for use in hot liquid filtration systems
• 2.5 square feet of filtration area in a compact Size 1 form factor
• 7 inch diameter by 16.5 inch length fits standard Size 1 bag filter housings

Compatibility

Designed as a direct-fit replacement for standard Size 1 liquid bag filter housings used in industrial and commercial liquid filtration applications.

Installation Notes

Installation should be performed by a qualified plumber, pipefitter, or industrial maintenance technician. Depressurize and isolate the filter housing before opening and replacing the bag. Ensure the new bag is seated fully in the housing basket with the sealing ring properly set to prevent bypass. Reinstall the housing cover to the manufacturer torque specification for that housing unit before returning the system to service.