Value Collection 262-2018 Standard Lathe Mandrel 9/32 in

Product Description

The VALUE COLLECTION 262-2018 is a standard lathe mandrel designed to hold workpieces securely between centers during turning operations. The mandrel features a 9/32 inch face diameter and an overall length of 4 inches, making it suited for light-duty turning work on small-bore parts. It is a solid, press-fit style mandrel that allows machinists and tool-and-die technicians to machine the outside diameter of a workpiece concentric to its bore. This type of tooling is a standard in both job shops and production environments where accurate, repeatable turning of bored or drilled workpieces is required.

This mandrel is used in conventional engine lathes and manual turning centers where a workpiece must be held on its internal bore for external turning, facing, or finishing passes. It is appropriate for small-part work in maintenance, repair, and fabrication shops. The 9/32 inch face diameter fits small-bore workpieces that require concentric external machining. Both apprentice machinists and experienced tool-room operators use standard mandrels as a fundamental workholding solution in general turning applications.

Key Features

• 9/32 inch face diameter for accurate fit in small-bore workpieces
• 4 inch overall length provides adequate support between centers
• Standard press-fit mandrel design for concentric external turning
• Lightweight construction at 0.27 pounds for easy handling and tool changes
• Sold individually for single-unit replacement or addition to existing tooling sets

Compatibility

Designed as an OEM-style replacement or standard tooling addition for conventional engine lathes and manual turning centers that accept between-center mandrel workholding.

Installation Notes

A licensed machinist or trained shop technician should install and use this mandrel. Before mounting, ensure the lathe is fully powered down and the spindle is locked. The mandrel should be pressed into the workpiece bore with an appropriate arbor press and driven between centers using a lathe dog and faceplate per standard workholding practice. Do not strike the mandrel directly with a steel hammer, as this can damage the centers or distort the mandrel taper.