Value Collection 231022BR Socket Pressure Plug Nptf

Product Description

The VALUE COLLECTION 231022BR is a socket pressure plug designed to seal threaded pipe openings under pressure. It uses a 1-1/4 inch - 11-1/2 thread per inch NPTF thread form, which provides a pressure-tight seal without the need for sealant tape on properly mated fittings. Constructed from uncoated alloy steel, the plug is suited for applications requiring high mechanical strength. Drive engagement is through a 3/4 inch hex key socket, allowing installation and removal with standard Allen or hex drive tooling. A taper rate of 3/4 inches per foot follows standard NPTF geometry for reliable interference fit sealing.

This socket pressure plug is used in hydraulic, pneumatic, and industrial fluid systems where threaded pipe ports must be capped and held under pressure. Typical applications include blocking unused ports on manifolds, cylinders, pumps, and valves in industrial machinery and commercial fluid power systems. Plumbers and pipefitters working on high-pressure process lines also use NPTF plugs of this type to pressure-test sections of pipe before final commissioning. The hex key drive recesses below the plug face, making it suitable for flush or near-flush installations.

Key Features

• 1-1/4 inch - 11-1/2 NPTF thread for pressure-tight interference fit sealing
• Alloy steel construction provides high tensile and shear strength
• 3/4 inch hex key drive allows installation with standard hex or Allen tooling
• 3/4 inches per foot taper conforms to NPTF thread standard geometry
• Uncoated finish suitable for use before applying system-specific coatings or sealants

Compatibility

Designed as an OEM-style replacement or service plug for industrial pipe systems using standard NPTF threaded ports in the 1-1/4 inch - 11-1/2 thread size.

Installation Notes

Installation should be performed by a licensed pipefitter, plumber, or qualified mechanic. Depressurize and isolate the system fully before removing or installing any threaded plug. Use a calibrated hex key or hex drive socket of the correct 3/4 inch size to avoid rounding the drive recess. NPTF threads are designed to seal on thread interference, but confirm system requirements for sealant use based on fluid type, pressure rating, and applicable codes such as the IPC or IFGC.