Value Collection 219-5116 End Mill Holder 5MT Taper

Product Description

The VALUE COLLECTION 219-5116 is a Morse taper end mill holder designed for milling machine spindles that accept a 5MT taper shank. It provides a rigid, concentric connection between the machine spindle and the cutting tool, securing end mills with a 1/2-inch bore. The holder features a 1.909-inch projection from the spindle face to the tool seat, giving the cutter the clearance needed for standard milling operations. No through-coolant port is present, making this holder suited for dry or flood-coolant applications where coolant is delivered externally. At 3.64 pounds, it is a solid, full-size holder appropriate for heavy-duty milling setups.

This end mill holder is used in vertical and horizontal milling machines equipped with a Number 5 Morse taper spindle. It is a common fit for manual knee mills, older Bridgeport-style machines, and similar toolroom equipment that uses MT5 tooling. Machinists and toolroom technicians reach for this holder when chucking up 1/2-inch shank end mills for face milling, slotting, profiling, and similar material removal operations. The 1.909-inch projection allows adequate tool stick-out for most standard workpiece setups without excessive overhang.

Key Features

• 5MT taper shank provides secure, self-holding fit in compatible spindles
• 1/2-inch hole diameter accepts standard 1/2-inch shank end mills
• 1.909-inch projection (48.50 mm) from spindle face to tool seat
• No through-coolant port — suited for external flood or dry cutting
• Solid construction at 3.64 pounds for rigidity under cutting loads

Compatibility

Designed as an OEM-style replacement or direct tooling addition for milling machine spindles that accept a Number 5 Morse taper and require a 1/2-inch end mill holder.

Installation Notes

Installation is performed by a machinist or toolroom technician. Power down and lock out the machine spindle before seating or removing the holder. Clean both the taper shank and the spindle bore thoroughly before insertion to ensure full contact and accurate runout. Use a draw bar of the correct thread pitch to secure the holder in the spindle; never operate a Morse taper holder without a properly torqued draw bar in place.