Value Collection 207627 Hex Head Cap Screw 3/4-10 X 2 in 18-8 Ss

Product Description

The VALUE COLLECTION 207627 is a 3/4-10 x 2 inch hex head cap screw manufactured from 18-8 stainless steel. It features a Unified National Coarse (UNC) thread form with a 3/4-10 thread size, meaning 3/4 inch nominal diameter and 10 threads per inch. The head is driven with a 1-1/8 inch hex wrench or socket. The 2 inch dimension refers to the length under the head. At 18-8 grade, the fastener offers solid corrosion resistance suitable for wet, outdoor, and mildly corrosive service environments. Tradespeople working in HVAC, plumbing, electrical, and general mechanical assembly rely on this grade and size for structural fastening where rust resistance is required.

This cap screw is appropriate for general mechanical and structural fastening applications across residential and light commercial installations. Common uses include equipment mounting, panel assembly, pipe flange connections, pump bases, and equipment frames where stainless steel is specified to resist corrosion or meet sanitary requirements. The UNC thread form is the standard coarse-pitch inch thread used throughout North American trade work, making this screw compatible with standard tapped holes and hex nuts of the same thread specification.

Key Features

• 18-8 stainless steel construction provides corrosion resistance in wet and outdoor environments
• 3/4-10 UNC thread form matches standard North American coarse-pitch tapped holes and nuts
• 2 inch length under head accommodates typical structural and equipment fastening stack-ups
• 1-1/8 inch hex drive accepts standard sockets and open-end wrenches
• Inch measurement system — fully compatible with standard SAE tooling and hardware

Compatibility

Designed for use in any application requiring a 3/4-10 UNC hex head cap screw in 18-8 stainless steel, including equipment frames, mounting bases, and flange assemblies that specify inch-series stainless fasteners.

Installation Notes

Installation should be performed by a qualified tradesperson using a properly sized 1-1/8 inch socket or open-end wrench. Always verify that the mating tapped hole or nut matches the 3/4-10 UNC thread specification before installation. Do not mix stainless steel fasteners with dissimilar metals in environments where galvanic corrosion is a concern. Apply an anti-seize compound rated for stainless fasteners to prevent galling during tightening, as 18-8 stainless is prone to thread galling under high torque.