Value Collection 205 00886 Aircraft Cable Wire 3/8 in

Product Description

The VALUE COLLECTION 205 00886 is a vinyl-coated aircraft cable wire constructed from galvanized steel with a 7 x 19 strand core configuration. The bare wire diameter measures 3/8 inches, and the overall coated diameter measures 15/32 inches. This cable delivers a rated breaking strength of 14,400 pounds, making it suitable for demanding rigging, lifting, and tension applications. It is sold in 1-foot increments from a 500-foot total coil, with a minimum order quantity of 100 feet. Licensed contractors and trade professionals working in mechanical, structural, or industrial settings are the primary installers of this wire type.

This aircraft cable is used across a wide range of commercial and industrial applications including overhead lifting systems, guy wire installations, safety restraints, mechanical linkages, and cable tray support runs. The vinyl coating over the galvanized steel core provides an added layer of abrasion resistance and environmental protection. The 7 x 19 strand construction provides good flexibility for routing around pulleys and through cable guides, making it a practical choice for both static and dynamic load applications.

Key Features

• 14,400 pound rated breaking strength for heavy-duty rigging and tension use
• 7 x 19 strand core construction provides flexibility for pulley and sheave routing
• Galvanized steel base wire resists corrosion in exposed or outdoor environments
• Vinyl coating adds abrasion resistance and surface protection
• 3/8 inch bare diameter with 15/32 inch overall coated diameter
• Sold in 1-foot increments from a 500-foot coil to minimize waste on variable-length jobs

Compatibility

Designed as a general-purpose coated aircraft cable for rigging, lifting, and mechanical tension applications where a 3/8 inch galvanized steel 7 x 19 strand wire with vinyl coating is specified.

Installation Notes

Installation should be performed by qualified riggers, millwrights, or licensed contractors familiar with applicable load ratings and safety factors for wire rope and cable assemblies. Always de-energize or relieve tension from the system before cutting or terminating cable ends. Use proper wire rope clips, swage fittings, or thimbles rated for the cable diameter and load; do not substitute hardware with lower working load limits. Follow applicable ASME B30 or OSHA rigging standards for overhead or load-bearing applications.