Value Collection 2 X 5 Wheel Grinding Wheel 5in 120 Grit

Product Description

The VALUE COLLECTION 2 X 5 WHEEL is a Type 2 bench and pedestal grinding wheel designed for material removal, deburring, and sharpening tasks on ferrous and non-ferrous workpieces. The abrasive matrix is aluminum oxide at 120 grit, which delivers a medium-fine cut suited for finishing passes and edge cleanup. The wheel measures 5 inches in diameter and 2 inches thick with a 1/2-inch arbor hole, and carries a maximum operating speed of 2,850 RPM. At 1.87 pounds, it mounts directly to standard bench grinder spindles. Medium hardness rating keeps the wheel from glazing under moderate pressure.

This grinding wheel is suited for shop maintenance, tool and cutter work, and light fabrication in both residential shop and light commercial environments. It is intended for use on bench grinders and pedestal grinders where a 5-inch diameter, 2-inch-wide Type 2 wheel is required. The 120-grit aluminum oxide construction makes it appropriate for finishing carbon steel, alloy steel, and similar metals. Machinists, maintenance technicians, and tool-room personnel are the typical end users for this wheel profile.

Key Features

• Aluminum oxide abrasive material — durable and self-sharpening on steel and iron
• 120 grit for medium-fine material removal and edge finishing
• Type 2 straight-face wheel geometry for standard bench and pedestal grinder spindles
• Medium hardness rating reduces glazing during continuous use
• 2,850 RPM maximum operating speed — verify spindle RPM before mounting
• White wheel color allows visual monitoring of wheel condition and contamination

Compatibility

Designed as a direct-mount replacement for bench and pedestal grinders accepting a 5-inch diameter, 2-inch-wide Type 2 wheel with a 1/2-inch arbor bore.

Installation Notes

Installation should be performed by a qualified technician familiar with abrasive wheel safety. Disconnect power to the grinder before mounting or removing any wheel. Inspect the wheel for cracks or chips before installation and perform a ring test by tapping lightly with a non-metallic object — a clear tone indicates an intact wheel, a dull thud indicates damage. Never exceed the 2,850 RPM maximum speed rating; confirm the grinder spindle speed matches or falls below this value before operating. ANSI B7.1 safety standards apply to the use, care, and protection of abrasive wheels.