Value Collection 17950 316 Ss Welded Tube 1/8 Inch Od

Product Description

The VALUE COLLECTION 17950 is a welded 316 stainless steel tube suited for instrumentation, fluid transfer, and light structural applications where corrosion resistance is a priority. It measures 1/8 inch outside diameter with a 0.049 inch wall thickness, yielding an inside diameter of 0.027 inches. Length ranges from 6 to 7 feet (72 to 84 inches). The 316 alloy grade provides enhanced resistance to chlorides and acidic environments compared to 304 grade, making it a common choice in chemical, marine, and process-industry work. Plumbers, HVAC technicians, and industrial pipefitters all encounter this tube size in sensing lines, pilot lines, and small-bore transfer runs.

This tube is appropriate for residential and commercial applications requiring small-diameter stainless tubing. Typical install scenarios include sensing lines on boilers and pressure controls, condensate or drain pilot lines, and instrumentation tubing runs where flexibility and corrosion resistance are required. The welded construction keeps wall tolerance consistent along the full length, which matters when fitting compression or flare fittings at each end.

Key Features

• 316 stainless steel alloy for superior chloride and acid corrosion resistance
• Welded tube construction with consistent 0.049 inch wall thickness
• 1/8 inch OD with 0.027 inch inside diameter suits small-bore instrumentation and sensing line work
• 6 to 7 foot usable length allows field cutting to exact run requirements
• Lightweight at 0.28 pounds per unit — easy to handle and transport on the job

Compatibility

Designed as a general-purpose small-bore stainless tube suitable for instrumentation, sensing line, and light fluid-transfer applications where 1/8 inch OD welded 316 stainless tubing is specified.

Installation Notes

A licensed plumber, HVAC technician, or qualified pipefitter should install this tube in pressurized or process systems. Shut off fluid supply and depressurize the line before cutting or fitting. Use a tube cutter rated for stainless steel rather than a hacksaw to maintain a clean, burr-free end for leak-free compression or flare connections. Installations on potable water or gas systems must comply with applicable local codes and IPC or IFGC requirements.