Value Collection 16HGSTPD1 16D Decking Nail 3.5 in Fluted Shank

Product Description

The VALUE COLLECTION 16HGSTPD1 is a 16D common decking nail intended for structural decking and framing applications. It measures 3.5 inches in overall length and is manufactured from Grade 2 steel with an uncoated finish. The 9-gauge wire diameter and fluted shank provide mechanical holding power as the nail is driven into lumber, making it suitable for deck boards, subfloor panels, and general wood-to-wood fastening. This nail is installed by carpenters, framers, and general contractors using a standard framing hammer or compatible nail gun.

This decking nail is used in residential and light commercial wood framing and decking assemblies. The fluted shank design increases withdrawal resistance compared to smooth-shank nails, which is important where fastener pull-through is a concern in deck and subfloor construction. The uncoated finish is appropriate for dry or protected interior applications and standard treated-lumber decking where a coated finish is not specified by the project.

Key Features

• 16D sizing at 3.5 inches overall length for standard decking and framing depth
• 9-gauge wire diameter provides a robust shank cross-section
• Fluted shank increases mechanical withdrawal resistance versus smooth shank
• Grade 2 steel construction for consistent hardness and driveability
• Uncoated finish — no coating to interfere with paint or sealant adhesion on finished decks

Compatibility

Designed as a standard 16D common-style decking nail compatible with typical wood framing and decking lumber assemblies where a 9-gauge, 3.5-inch fluted-shank fastener is specified.

Installation Notes

Installation is performed by qualified carpenters or framers using a standard framing hammer or a nail gun rated for 16D common nails. Follow applicable building codes and the decking manufacturer's fastener schedule for nail spacing and pattern requirements. When fastening into treated lumber, verify that the nail finish and material meet the preservative treatment compatibility requirements of the project specification. Inspect nails for deformity before use and discard any bent or damaged fasteners.