Value Collection 1510058350 Wheel Brush 4 Inch Brass

Product Description

The VALUE COLLECTION 1510058350 is a knotted brass wheel brush designed for aggressive surface preparation, deburring, and weld cleaning on metal workpieces. The 4-inch outside diameter and knotted brass fill deliver consistent scrubbing action on contoured and flat surfaces alike. Rated to 20,000 RPM, this brush is built for use on angle grinders and bench grinders fitted with a 5/8-11 threaded arbor. The 7/8-inch trim length and 1/2-inch face width concentrate wire contact for effective material removal without excessive loading. Machinists, fabricators, and metalworkers install this brush for rust removal, scale removal, and light surface conditioning tasks.

This wheel brush is suited for both shop and field metalworking applications. It fits standard angle grinders and bench grinders with a 5/8-11 threaded spindle. Typical use cases include pre-weld surface prep, post-weld spatter and slag removal, rust and oxidation removal, and paint stripping on steel and softer metal substrates. The brass wire construction makes it appropriate for use on materials where steel wire may cause contamination or where a softer abrasive action is preferred, such as on copper, brass, or aluminum workpieces.

Key Features

• Knotted brass wire fill for aggressive, consistent surface contact
• 4-inch outside diameter suits common angle grinder and bench grinder applications
• Rated to 20,000 RPM for use with high-speed power tools
• 5/8-11 threaded arbor hole for direct mounting — no separate shank required
• 1/2-inch face width and 7/8-inch trim length for focused wire action
• Brass fill minimizes contamination risk on non-ferrous workpieces

Compatibility

Designed for use with angle grinders and bench grinders equipped with a 5/8-11 threaded spindle arbor. Confirm tool spindle thread and maximum RPM rating meets or exceeds 20,000 RPM before mounting.

Installation Notes

This brush is installed by a machinist, fabricator, or maintenance technician using standard grinder tooling. Power down and disconnect or lock out the grinder before mounting or removing the brush. Thread the brush onto the 5/8-11 spindle securely and confirm the tool guard is in place before operation. Always verify the grinder's rated maximum RPM meets or exceeds the brush rating, and wear appropriate eye and face protection during use.