Value Collection 144429620000000 Chucking Reamer 2in Hss

Product Description

The VALUE COLLECTION 144429620000000 is a high-speed steel (HSS) chucking reamer designed to finish-ream drilled or bored holes to a precise 2-inch diameter. Built with a straight flute geometry and a bright, uncoated surface finish, it delivers clean, accurate sizing in a wide range of ferrous and non-ferrous materials. The straight-cylindrical shank seats securely in standard machine chucks, making it suitable for use in drill presses, lathes, and machining centers. At 14 inches overall length with a 4-inch flute length, this reamer handles deeper reach applications where a shorter tool would fall short. Right-hand cutting direction is standard for conventional machine operation.

This chucking reamer is intended for machine shop and production environments where hole tolerance and surface finish are critical. It is well suited for maintenance, repair, and manufacturing operations involving larger-diameter bores. Typical applications include finishing holes in tooling plates, fixtures, pump housings, and structural components. The 2-inch diameter targets heavy-duty industrial work rather than light precision or instrument-class reaming.

Key Features

• 2-inch reaming diameter for large-bore finishing applications
• HSS construction provides toughness and resistance to edge chipping under moderate cutting loads
• Straight flute design aids chip evacuation in through-hole and short blind-hole operations
• Straight-cylindrical shank for compatibility with standard machine chucks and holders
• Bright, uncoated finish — ready to use as received or can accept aftermarket coatings
• Right-hand cut for standard spindle rotation

Compatibility

Designed as a machine-held chucking reamer for use in drill presses, engine lathes, turret lathes, and CNC machining centers equipped with a chuck or collet capable of accepting a straight-cylindrical shank at 2-inch diameter scale.

Installation Notes

A licensed machinist or qualified tool-and-die technician should set up and operate this reamer. Power down and lock out the machine spindle before mounting or removing the tool from the chuck. Use appropriate cutting fluid for the workpiece material to extend tool life and improve bore finish. Never force a reamer through an undersized hole — the pre-drilled or bored hole should be within the recommended allowance for the diameter being reamed.