Value Collection 116AB25K05 Pressure Gauge 5000 Psi

Product Description

The VALUE COLLECTION 116AB25K05 is a liquid-filled analog pressure gauge rated to 5,000 psi, designed for demanding hydraulic, pneumatic, and process-fluid applications. The 2.5-inch dial provides a clear, readable scale in the field. A glycerine-and-water fill dampens needle movement caused by pressure pulsations and vibration, extending service life in high-cycle systems. The wetted parts and Bourdon tube are stainless steel, making this gauge suitable for corrosive media environments. The stainless steel case adds durability in harsh installation settings. Accuracy is rated at plus or minus 3-2-3 percent of scale across the full range. Licensed plumbers, pipefitters, hydraulic technicians, and industrial service professionals are the typical installers.

This gauge is suited for residential and light commercial applications involving high-pressure hydraulic systems, compressed air systems, water treatment equipment, and process piping where a center back mount configuration is required. The 1/4-inch NPT center back connection allows direct inline installation into a tee or test port on the back panel of a manifold or enclosure. The glycerine fill is appropriate for systems with moderate vibration or pulsating pressure. This gauge weighs 0.3 pounds and is compact enough to fit in tight panel installations where a 2.5-inch dial format is standard.

Key Features

• 5,000 psi maximum pressure range on a clear analog dial
• Glycerine-and-water liquid fill dampens needle flutter in high-vibration or pulsating-pressure environments
• Stainless steel Bourdon tube and wetted parts resist corrosion from aggressive media
• Stainless steel case provides durable housing for harsh service conditions
• Plus or minus 3-2-3 percent of scale accuracy across the full pressure range
• 1/4-inch NPT center back mount for straightforward inline installation

Compatibility

Designed as an OEM-style replacement or direct-install gauge for systems requiring a 2.5-inch dial, 1/4-inch NPT center back mount pressure gauge rated to 5,000 psi.

Installation Notes

Installation is typically performed by a licensed plumber, pipefitter, or hydraulic technician. Depressurize and isolate the system completely before removing or installing any pressure gauge. Apply thread sealant or PTFE tape to the NPT threads per standard pipe-fitting practice; do not over-torque the fitting into cast or aluminum ports. Verify the system operating pressure does not exceed the gauge's 5,000 psi rating; sustained overpressure will damage the Bourdon tube and void accuracy.