Value Collection 102-740-006 Pleated Air Filter Merv 8 16x20x1

Product Description

The VALUE COLLECTION 102-740-006 is a MERV 8 pleated air filter designed for residential and light commercial heating and air conditioning systems. Measuring 16 x 20 x 1 inches (nominal), it delivers 670 CFM of rated airflow with an initial resistance of 0.29 inches water gauge and a final resistance of 1 inch water gauge at 300 FPM. The synthetic filter media captures 35 to 45 percent of airborne particles, making it a solid step up from fiberglass panel filters. It carries ratings under ASHRAE 52.2-2012 and UL 900. HVAC technicians and building maintenance professionals install this filter as a standard service replacement.

This filter fits forced-air heating and air conditioning units that accept a 16 x 20 x 1 inch nominal filter. It is suited for residential furnaces, air handlers, and packaged HVAC units operating at standard airflow conditions. The beverage board frame handles typical system static pressures and is moisture resistant, making it appropriate for humid return-air environments. It is rated for continuous operation up to 150 degrees F, which covers all standard residential and light commercial HVAC applications.

Key Features

• MERV 8 efficiency rating per ASHRAE 52.2-2012 with 35 to 45 percent particle capture efficiency
• Exclusive vForm self-supported pleats maintain pleat geometry under airflow without a wire backing
• Sturdy moisture-resistant beverage board frame resists deformation in humid return-air plenums
• Rated to 670 CFM with a maximum face velocity of 300 FPM
• UL 900 listed for fire safety compliance
• Low initial resistance of 0.29 inches water gauge minimizes static pressure impact at installation

Compatibility

Designed as a standard replacement for heating and air conditioning units requiring a 16 x 20 x 1 inch nominal pleated filter.

Installation Notes

HVAC technicians should power down the air handler or furnace at the disconnect or thermostat before replacing the filter. Confirm airflow direction arrows on the filter frame align with system airflow toward the blower. Inspect the filter track and frame seals for bypass gaps before closing the access panel. Filter replacement interval should be determined based on system runtime, indoor air quality conditions, and final resistance readings.