Value Collection 0M283V3 Viton Round Cord Stock 100 Ft

Product Description

The VALUE COLLECTION 0M283V3 is a Viton round cord stock supplied in a 100-foot standard coil length. Viton is a fluoroelastomer compound widely used in sealing applications that demand resistance to fuels, oils, hydraulic fluids, and elevated operating temperatures. This cord stock is cut-to-length material used by plumbers, HVAC technicians, and industrial maintenance professionals to fabricate custom O-rings, gaskets, and compression seals on the job. The round cross-section profile makes it suitable for static face-seal and radial groove applications where a preformed O-ring is unavailable or a custom size is required.

This cord stock is used across residential and commercial maintenance applications including fluid system repairs, pump and valve rebuilding, and HVAC equipment sealing. The 100-foot coil length provides enough material for multiple field fabrications or shop stock. It is appropriate for use in applications where exposure to petroleum-based fluids, solvents, or moderate to high heat is expected. Tradespeople typically keep Viton cord stock on hand as a replacement solution when standard O-ring sizes are not stocked.

Key Features

• Viton fluoroelastomer material provides strong resistance to fuels, oils, and hydraulic fluids
• Round cross-section suits standard O-ring groove and face-seal applications
• 100-foot coil length supports multiple field or bench fabrications from a single unit
• Cut-to-length format allows custom sizing when preformed O-rings are unavailable
• Suitable for elevated-temperature environments common in HVAC and fluid handling systems

Compatibility

Designed as a general-purpose cut-to-length sealing cord for use in static O-ring groove and face-seal applications across HVAC, plumbing, and industrial fluid-handling equipment where Viton elastomer material is specified.

Installation Notes

Installation is typically performed by licensed HVAC technicians, plumbers, or industrial maintenance personnel. Isolate and de-pressurize any fluid or gas system completely before removing existing seals and fitting new cord stock. Cut the cord to the required circumference using a clean, straight cut and bond the ends with an appropriate cyanoacrylate or Viton-compatible adhesive before seating in the groove. Inspect groove dimensions for burrs or damage prior to installation to ensure a proper seal.