Value Collection 09426305 Aluminum Sheet 3003-H14

Product Description

The VALUE COLLECTION 09426305 is a flat aluminum sheet cut to 24 inches long by 12 inches wide at 0.063 inches thick, made from Alloy 3003-H14. This alloy designation indicates a manganese-strengthened aluminum base (3003) in the H14 half-hard temper, which balances moderate tensile strength with good formability and corrosion resistance. The sheet is suited for fabrication tasks where the material needs to be bent, cut, or shaped without cracking. HVAC fabricators, plumbers, electricians, and general sheet-metal tradespeople regularly work with this stock for ductwork patches, flashing, equipment panels, and custom brackets.

This sheet is a common stock material in residential and light commercial trade work. Typical applications include HVAC duct repair and fabrication, plenum lining patches, plumbing access panel blanks, electrical enclosure repairs, and general-purpose sheet-metal fabrication. The 24-inch by 12-inch format is a standard cut size that fits a range of benchtop and field fabrication tasks without requiring additional shearing for many common uses.

Key Features

• Alloy 3003-H14 provides good corrosion resistance and moderate strength suitable for formed or flat applications
• H14 half-hard temper allows bending and forming without cracking under normal shop conditions
• 0.063-inch thickness is a widely used gauge for duct patches, flashing, and light structural panels
• 24-inch by 12-inch cut size works directly from stock for many standard fabrication tasks
• Weighs 1.81 pounds per sheet, making it easy to handle in the field or at the bench

Compatibility

Designed as a general-purpose aluminum sheet stock for trade fabrication and repair applications across HVAC, plumbing, electrical, and light construction work.

Installation Notes

Sheet metal work should be performed by qualified tradespeople using appropriate personal protective equipment, including gloves and eye protection, as cut aluminum edges are sharp. Cutting, bending, and forming should be done with tools rated for aluminum stock at this gauge. Deburr all cut edges before installation in any system where personnel contact or airflow is a consideration. Follow applicable local codes and trade standards for the specific installation application.