Value Collection 06812747 Compression Spring 0.72 in Od

Product Description

The VALUE COLLECTION 06812747 is a compression spring designed for general mechanical and industrial applications requiring controlled resistance to axial load. With an outside diameter of 0.72 inches and a free length of 1.5 inches, this spring fits a range of standard assemblies and tooling setups. Wire diameter is 0.062 inches. The spring rate is 15.4 pounds per inch, and the maximum work load is 14.73 pounds. This part is suited for use by mechanical assemblers, maintenance technicians, and OEM production teams working with light- to medium-duty compression applications.

This compression spring is appropriate for residential and commercial equipment assemblies, tooling fixtures, valves, latches, and other mechanisms that require repeatable return force. Its compact solid height of 0.424 inches allows for use in tight-clearance installations. The hole diameter clearance recommendation is 0.75 inches. Supplied in a package quantity of 10 units, this spring is well suited for bench stock, MRO replenishment, or production line use where consistent spring performance is required across multiple assemblies.

Key Features

• Outside diameter of 0.72 inches for precise fit in standard spring pockets
• Free length of 1.5 inches with a solid height of 0.424 inches
• Spring rate of 15.4 pounds per inch for predictable deflection under load
• Maximum work load rated at 14.73 pounds
• Wire diameter of 0.062 inches for consistent coil geometry
• Packaged in quantities of 10 for MRO and production stocking

Compatibility

Designed as a general-purpose compression spring suitable for mechanical assemblies, valves, latches, fixtures, and OEM equipment requiring a 0.72-inch outside diameter spring with a 1.5-inch free length.

Installation Notes

Compression springs should be installed by qualified mechanical or maintenance technicians familiar with spring-loaded assemblies. Relieve all tension and de-energize or depressurize the host assembly before removing or installing springs. Verify that the spring pocket or guide pin matches the specified hole diameter of 0.75 inches and that travel does not compress the spring beyond its solid height of 0.424 inches, which could cause coil binding or component damage.