Value Collection 06812424 Compression Spring 0.6in Od 2in

Product Description

The VALUE COLLECTION 06812424 is a compression spring designed for general mechanical and industrial applications requiring controlled axial resistance. With a 0.6 inch outside diameter and a 2 inch free length, this spring delivers a spring rate of 9.83 lb/in and a maximum work load of 12.55 pounds. Wire diameter measures 0.054 inches, giving the coil its characteristic stiffness for light-to-medium load service. Sold in packs of 10, this part suits maintenance shops, OEM assembly lines, and field technicians who need consistent, repeatable spring performance in compact assemblies. A licensed mechanic, millwright, or MRO technician typically selects and installs this spring type.

This compression spring fits a wide range of light mechanical applications including valve assemblies, actuator returns, tool fixtures, and panel latch mechanisms. The 0.625 inch hole diameter clearance and 0.564 inch solid height make it suitable for close-tolerance bores in residential equipment, commercial machinery, and industrial components. No specific OEM system family is stated in the product data; selection should be based on matching the spring rate, load, and dimensional envelope to the target assembly.

Key Features

• Spring rate of 9.83 lb/in for predictable, linear resistance across the compression range
• Maximum work load of 12.55 pounds supports light-to-medium duty applications
• 0.054 inch wire diameter provides consistent coil geometry and fatigue resistance
• Solid height of 0.564 inches limits over-compression in tight assemblies
• Fits bores up to 0.625 inches in diameter
• Packaged in quantities of 10 for bench stock and MRO replenishment

Compatibility

Designed as a general-purpose replacement or service compression spring for assemblies requiring a 0.6 inch outside diameter, 2 inch free length, and a spring rate near 9.83 lb/in. No specific OEM model or system compatibility was provided in the product data; verify dimensional and load specifications against the target assembly before installation.

Installation Notes

Compression springs in mechanical assemblies should be installed with the load path aligned axially to prevent buckling or side loading. Relieve system pressure and de-energize any actuators or mechanisms before removing or replacing the existing spring. Inspect the mating bore and shaft for wear or burrs that could alter seating and effective length. Confirm that the replacement spring solid height and maximum load rating are compatible with the mechanical stop geometry of the assembly.