Value Collection 06810675 Compression Spring 0.24 in Od

Product Description

The VALUE COLLECTION 06810675 is a small-diameter compression spring suited for light-duty mechanical assemblies, fixtures, and tooling applications. With an outside diameter of 0.24 inches and a free length of 1.5 inches, this spring delivers a spring rate of 9.08 lb/in and a maximum work load of 6.59 pounds. The wire diameter measures 0.032 inches, and the solid height is 0.653 inches. These springs are commonly installed by machinists, maintenance technicians, and assembly workers in production or repair environments where consistent, repeatable spring force is required in a compact form factor.

This compression spring is suited for residential and light commercial mechanical assemblies, precision instruments, valves, latches, and similar applications where small coil geometry and controlled load characteristics are needed. It fits into a hole diameter of 0.25 inches, making it compatible with standard bored housings and guides at that dimension. Sold in packages of 10, it is a practical solution for bench stock or production replenishment.

Key Features

• Outside diameter of 0.24 inches fits a 0.25 inch bore housing or guide
• Spring rate of 9.08 lb/in provides consistent, predictable deflection under load
• Maximum work load rated at 6.59 pounds for light-duty compression applications
• Wire diameter of 0.032 inches and solid height of 0.653 inches for compact stacking
• Packaged in quantities of 10 for bench stock or small production runs

Compatibility

Designed as a general-purpose compression spring for mechanical assemblies, fixtures, and devices requiring a 0.24 inch OD coil spring with a 1.5 inch free length and a 9.08 lb/in spring rate.

Installation Notes

Compression springs of this size are typically installed by machinists or maintenance technicians during assembly or repair. Verify that the mating bore or guide post dimensions match the specified hole diameter of 0.25 inches and that the assembly housing provides adequate clearance for full deflection without binding. De-energize or depressurize any system before replacing a loaded spring. Use appropriate hand protection when handling compressed springs during installation or removal.