Value Collection 0286139 Silicone Round Cord Stock 1/8 in 100 Ft

Product Description

The VALUE COLLECTION 0286139 is a silicone round cord stock supplied in a 100-foot standard coil. This flexible sealing cord is used to create custom gaskets, seals, and compression seals in mechanical, HVAC, and plumbing applications. Silicone material provides resistance to temperature extremes, moisture, and environmental exposure, making it well suited for service environments where standard rubber would degrade. The cord measures 0.139 inches in actual decimal diameter, nominally listed as 1/8 inch, and is sold as a single 100-foot coil. Licensed tradespeople and maintenance technicians cut this stock to length in the field to fit a wide range of sealing and gasketing needs.

This cord stock is commonly used in HVAC equipment service, plumbing system maintenance, and light industrial applications where a field-fabricated silicone seal or gasket is required. It is appropriate for both residential and commercial service work. Installers use it wherever a pre-formed seal is unavailable or a custom-length seal must be formed on site. The 100-foot coil length provides enough material for multiple jobs from a single package.

Key Features

• Silicone material resists high and low temperature extremes common in HVAC and mechanical service environments
• Round cross-section profile seats consistently in standard groove and compression-seal applications
• 0.139 inch actual decimal diameter with a nominal 1/8 inch designation
• 100-foot coil allows field-cutting to any required length
• Inch-system dimensioning compatible with standard US trade tooling and measurement

Compatibility

Designed as a general-purpose field-cut sealing cord for residential and commercial HVAC, plumbing, and mechanical applications requiring a 1/8 inch nominal round silicone seal or gasket.

Installation Notes

Cut to required length using a sharp utility knife or razor blade on a clean flat surface for a square, consistent cut. Ensure mating surfaces are clean and free of old sealant, debris, or oil before seating the cord. For compression-seal applications, do not overcompress the cord, as silicone can deform permanently under excessive clamp load. Installation should follow applicable equipment manufacturer guidelines and any relevant local mechanical or plumbing codes.