Value Collection 0285375 Neoprene Round Cord 0.375 in 100 Ft

Product Description

The VALUE COLLECTION 0285375 is a neoprene round cord stock supplied in a 100-foot standard coil. Neoprene cord stock is a dense, flexible elastomeric material used to create custom gaskets, seals, cushioning strips, and vibration-dampening applications across mechanical and industrial systems. At 0.375 inches in diameter, this cord is well suited for sealing grooves, door and hatch perimeters, and equipment enclosures where a compressible round profile is required. Plumbers, HVAC technicians, and millwrights commonly use neoprene cord stock when fabricating field-cut seals or replacing worn gasket material in mechanical rooms and equipment cabinets.

This cord stock is appropriate for residential and light commercial applications where a round neoprene profile is needed. Typical uses include sealing around pipe penetrations, equipment cabinet closures, compressor mounts, and ductwork access panels. The 100-foot coil length allows multiple cuts from a single piece, reducing waste when working on projects requiring varying seal lengths. The inch measurement system and 3/8-inch diameter make layout and cutting straightforward with standard shop tools.

Key Features

• Neoprene construction provides good resistance to weathering, oils, and moderate temperature swings
• Round cross-section compresses evenly into sealing grooves and channel profiles
• 0.375-inch diameter suits a wide range of standard gasket groove dimensions
• 100-foot coil length supports multiple field cuts from a single piece
• Measured in the inch system for straightforward layout with standard measuring tools

Compatibility

Designed as a general-purpose neoprene cord stock for field-fabricated seals and gaskets in mechanical, HVAC, and plumbing applications where a 0.375-inch round neoprene profile is specified.

Installation Notes

Cut neoprene cord stock with a sharp utility knife or scissors on a clean, flat surface to ensure square, even cuts. When fitting cord into a channel or groove, allow slight compression of the material for a proper seal without overstretching. Adhesive-backed tape or appropriate contact cement may be used to hold the cord in place during assembly. Wear appropriate hand protection when cutting, and confirm the neoprene compound is compatible with any fluids or chemicals present in the application before installation.