Value Collection 0283125 Viton Round Cord 1/8 in 100 Ft

Product Description

The VALUE COLLECTION 0283125 is a Viton fluoroelastomer round cord stock supplied in a 100-foot standard coil. Viton cord stock is used to fabricate custom gaskets, O-ring cord seals, and compression seals on-site wherever a pre-cut ring is not practical. This cord measures 0.125 inches in diameter with a manufacturing tolerance of plus or minus 0.007 inches. The fluoroelastomer compound offers strong resistance to oils, fuels, solvents, and many chemicals, making it a practical choice for plumbing, HVAC, and industrial sealing applications. The 100-foot coil format allows technicians to cut lengths to spec in the field.

This cord stock is suited for use in light industrial, commercial, and residential maintenance settings where field-fabricated seals are needed. Common applications include sealing around pipe penetrations, creating face gaskets, and fitting compression seals in fluid-handling systems. The round profile seats consistently in grooves and channel-type seal races. Viton material performs across a range of chemical environments where standard EPDM or neoprene cord would degrade.

Key Features

• Viton fluoroelastomer construction for strong chemical and oil resistance
• Round cross-section profile for consistent groove seating
• 0.125-inch diameter with a tight tolerance of plus or minus 0.007 inches
• 100-foot coil allows field cutting to any required length
• Inch measurement system for straightforward sizing on standard US fittings

Compatibility

Designed as a general-purpose Viton round cord stock suitable for field-fabricated seals and gaskets in fluid-handling, plumbing, and HVAC service applications.

Installation Notes

Cord stock seals are typically installed by licensed plumbers, HVAC technicians, or maintenance mechanics familiar with gasket fabrication. Depressurize and drain the system before removing any existing seals or opening flanged connections. Cut cord to the required length using a sharp blade for a clean, square end, and join ends with an appropriate Viton-compatible adhesive when forming a closed ring. Refer to applicable IPC or IFGC guidelines for seal material requirements on specific fluid or gas service applications.