Value Collection 01-1049 Fiber Disc 120 Grit 7 in

Product Description

The VALUE COLLECTION 01-1049 is a 7-inch silicon carbide fiber disc designed for aggressive material removal and surface finishing on hard, brittle materials such as stone, ceramics, glass, and non-ferrous metals. The resinoid bond secures the silicon carbide abrasive to a fiber backing, providing consistent cut rates under load. Rated at 8,500 RPM maximum, this disc operates safely on standard angle grinders equipped with a 7/8-inch arbor. At 120 grit, it falls in the fine grade range, making it suited for finish grinding and light stock removal where surface quality matters alongside cut rate.

This fiber disc is used in fabrication shops, metal finishing operations, and stoneworking applications. The 7-inch diameter fits grinders and sanders commonly used for larger surface work. The arbor hole attachment type allows direct mounting to a compatible backing pad without additional hardware. Typical applications include deburring, blending welds on non-ferrous substrates, and surface conditioning on stone or masonry. Licensed trades including metal fabricators and tile and stone contractors commonly specify silicon carbide abrasives for these tasks.

Key Features

• Silicon carbide abrasive material rated for hard, brittle, and non-ferrous workpieces
• 120 grit fine grade for controlled stock removal and surface finishing
• 7-inch disc diameter suits standard large-format angle grinders and disc sanders
• 7/8-inch arbor hole with resinoid bond for secure attachment and stable performance
• 8,500 RPM maximum speed rating for safe operation at typical grinder speeds
• Fiber backing provides flexibility and durability under moderate grinding pressure

Compatibility

Designed as a direct-mount replacement fiber disc for 7-inch angle grinders and disc sanders equipped with a 7/8-inch arbor backing pad.

Installation Notes

Installation should be performed by a qualified operator familiar with abrasive disc handling and grinder safety. Always power down and unplug the grinder before mounting or removing the disc. Inspect the disc for cracks or damage before each use and never exceed the 8,500 RPM maximum speed rating. Ensure the backing pad diameter and arbor size match before operation, and use appropriate eye and face protection per ANSI B11 abrasive safety guidelines.