Value Collection 0-CD-700CS7- Wing Nut 1/4-20 Unc Steel

Product Description

The VALUE COLLECTION 0-CD-700CS7- is a standard wing nut manufactured from steel with a 1/4-20 UNC right-hand thread. Designed for applications requiring frequent hand-tightening and removal without tools, this nut suits general-purpose fastening across HVAC, plumbing, electrical, and mechanical assembly work. The part carries a material grade of 1015-1025 carbon steel and ships uncoated, making it straightforward to inspect or coat in the field if corrosion resistance is needed. With a wing span of 1.375 inches and a wing height of 0.625 inches, the geometry provides adequate hand grip for typical tightening torque in light-duty installations.

This wing nut is suited for residential and light commercial trade applications where panels, covers, access doors, or non-structural assemblies require repeated removal. HVAC technicians commonly use standard wing nuts on equipment access panels, filter frames, and duct assemblies. Plumbers and electricians use them on enclosure covers and junction points where hand access is available. The 1/4-20 UNC thread is one of the most common unified coarse thread sizes in North American trade hardware, making this nut a practical stock item for service vans and shops.

Key Features

• 1/4-20 UNC right-hand thread for compatibility with standard 1/4-20 fastener assemblies
• Steel construction, material grade 1015-1025 carbon steel
• Wing span of 1.375 inches and wing height of 0.625 inches for reliable hand grip
• Base diameter of 0.5 inches provides stable seating on mating surfaces
• Uncoated finish — field-coatable or usable as-is in dry, protected environments
• Series 700 standard wing nut profile

Compatibility

Designed as a general-purpose replacement or stock wing nut for any 1/4-20 UNC threaded fastener application requiring a standard wing nut profile.

Installation Notes

Install and remove by hand; do not use power tools on wing nuts as over-torquing will strip the thread or crack the wing. Ensure mating threads are clean and free of debris before installation. For applications subject to vibration, a locking washer or secondary fastener may be appropriate. No special tools or trade certifications are required for standard wing nut installation.