Usa Industrials BULK-RS-SN70-7 Neoprene Sheet 12x12

Product Description

The USA INDUSTRIALS BULK-RS-SN70-7 is a neoprene-blend spring rubber sheet cut to a 12-inch by 12-inch stock size. It carries a Shore A durometer rating of 65 to 75, placing it in the medium-firm hardness range suitable for gasket fabrication, vibration isolation pads, and sealing applications. Tensile strength is rated at 1000 psi. The sheet is black and is designed to be cut to size in the field by HVAC technicians, plumbers, pipefitters, and mechanical contractors who need a reliable elastomeric material for custom sealing or cushioning work.

This neoprene-blend spring rubber sheet is suited for both residential and light commercial mechanical applications. Common uses include fabricating custom gaskets, anti-vibration mounts, pipe penetration seals, and equipment isolation pads. Its operating temperature range of -20 degrees F to 170 degrees F makes it appropriate for indoor mechanical rooms, rooftop equipment pads, and general HVAC or plumbing service environments where moderate temperature exposure is expected.

Key Features

• Neoprene-blend spring rubber construction for consistent resilience and compression recovery
• Shore A durometer of 65 to 75 for medium-firm hardness suitable for gasketing and vibration isolation
• Tensile strength of 1000 psi for reliable performance under mechanical load
• Operating temperature range of -20 degrees F to 170 degrees F
• 12 inches x 12 inches stock sheet size - cut to fit in the field
• Black color, consistent with standard neoprene sheet stock

Compatibility

Designed as a general-purpose neoprene-blend rubber sheet suitable for custom gasket fabrication, sealing, and vibration isolation across residential and commercial mechanical applications.

Installation Notes

This sheet is typically cut to the required shape and size using a sharp utility knife, die punch, or gasket cutter - always cut on a stable, protected work surface. Ensure the mating surfaces are clean, dry, and free of oil or debris before installing any fabricated gasket or pad. Consult applicable mechanical codes such as the IFGC or IPC for gasket material requirements specific to the system being serviced. Verify temperature and chemical compatibility with the intended service environment before installation.